Description
Stainless steel swimming pool ladders are durable and safe equipment specifically designed for swimming pools. Made of 304 or 316 stainless steel, they feature rust resistance, anti-slip properties, and high load-bearing capacity, and support customized installation to meet different pool needs.
The material of stainless steel swimming pool ladders needs to consider both corrosion resistance and safety:
304 stainless steel: Contains 18% chromium and 8% nickel, forming a dense oxide film that effectively resists corrosion from chlorine ions and moisture in the pool, making it a mainstream choice.
316 stainless steel: Adds 2% molybdenum to the 304 base, providing stronger corrosion resistance, suitable for high-salinity or chemical environments, but at a higher cost.
Surface treatment: The handrails feature a MU-shaped arc design that fits the palm for anti-slip; the steps are thickened and treated with anti-slip treatment to ensure stability when stepping with bare or wet feet.
Size standards:
Width: 600–800mm, height 300–400mm, handrail height approximately 1000mm.
Step spacing: 250–280mm, recommended installation angle 15°, height above water surface approximately 650mm.
Installation methods:
Embedded installation: The bottom fixing anchors are embedded in the pool edge, with no exposed screws to prevent scratches.
Non-embedded type: Fixed with expansion screws, suitable for temporary or renovated swimming pools.
Location requirements: Prioritize installation at the four corners of the pool edge, ensuring it is flush with the pool bottom. Load-bearing capacity and anti-slip properties must be tested during acceptance.
The material of stainless steel swimming pool ladders needs to consider both corrosion resistance and safety:
304 stainless steel: Contains 18% chromium and 8% nickel, forming a dense oxide film that effectively resists corrosion from chlorine ions and moisture in the pool, making it a mainstream choice.
316 stainless steel: Adds 2% molybdenum to the 304 base, providing stronger corrosion resistance, suitable for high-salinity or chemical environments, but at a higher cost.
Surface treatment: The handrails feature a MU-shaped arc design that fits the palm for anti-slip; the steps are thickened and treated with anti-slip treatment to ensure stability when stepping with bare or wet feet.
Size standards:
Width: 600–800mm, height 300–400mm, handrail height approximately 1000mm.
Step spacing: 250–280mm, recommended installation angle 15°, height above water surface approximately 650mm.
Installation methods:
Embedded installation: The bottom fixing anchors are embedded in the pool edge, with no exposed screws to prevent scratches.
Non-embedded type: Fixed with expansion screws, suitable for temporary or renovated swimming pools.
Location requirements: Prioritize installation at the four corners of the pool edge, ensuring it is flush with the pool bottom. Load-bearing capacity and anti-slip properties must be tested during acceptance.