How to build a 5~10㎡ hot spring tub? What equipment is needed? Below are the project key points and core equipment applications sorted out by Yuanwang Baili!
I. Civil Engineering Structure Standards
Seated hot spring tub dimensions: Pool edge height 45-50cm (referring to ergonomics), water depth 70-75cm (effective soaking depth), and a 50mm insulation layer must be pre-embedded in the pool wall.
-
Pool edge height: 45-50cm, conforming to the movement habits of adults sitting in and standing up, without strenuous climbing, improving usability;
-
Effective soaking depth: 70-75cm, just covering the key soaking area from the waist to the chest of adults, balancing comfort and safety;
-
Pool wall insulation: A 50mm insulation layer must be pre-embedded. It is recommended to use high-efficiency insulation materials such as extruded board or polyurethane to reduce heat loss and lower later heating energy consumption.
Foundation bearing capacity ≥ 300kg/㎡ (C30 concrete + double-layer waterproofing) to eliminate water seepage and settlement hazards.
II. Core Hot Spring Water Treatment System Equipment
AI hot spring machine (supporting mineral hot spring qualities such as carbonated spring, silk bath, iron spring, sulfur spring, etc.), heating system (water source heat pump, electric heating, boiler, etc.).
Constant temperature water tank (volume = hot spring tub water volume × 1.2 times), multi-media filter (water quality filtration and purification).
III. Pipeline Network System Engineering
Water supply and return main pipes, circulating pipelines and other pipeline networks shall be laid out and configured according to professional design, and various equipment commissioning shall be completed!
Click: 21
Author: